View MC1010702_753452.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MC10107 Triple 2-Input Exclusive OR/ Exclusive NOR Gate
* * *
The MC10107 is a triple-2 input exclusive OR/NOR gate. PD = 40 mW typ/gate (No Load) tpd = 2.8 ns typ tr, tf = 2.5 ns typ (20%-80%)
LOGIC DIAGRAM
4 5 9 7 14 15 3 = (4 * 5) + (4 * 5) 2 = (4 * 5) + (4 * 5) VCC1 = PIN 1 VCC2 = PIN 16 VEE = PIN 8 2 3 11 10 12 13 PDIP-16 P SUFFIX CASE 648 1 1 PLCC-20 FN SUFFIX CASE 775 10107 AWLYYWW CDIP-16 L SUFFIX CASE 620 1 16 MC10107P AWLYYWW
http://onsemi.com MARKING DIAGRAMS
16 MC10107L AWLYYWW
DIP PIN ASSIGNMENT
VCC1 AOUT AOUT AIN AIN *NC BIN VEE 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 VCC2 CIN CIN COUT COUT BOUT BOUT BIN A WL YY WW
= Assembly Location = Wafer Lot = Year = Work Week
ORDERING INFORMATION
Device MC10107L MC10107P MC10107FN Package CDIP-16 PDIP-16 PLCC-20 Shipping 25 Units / Rail 25 Units / Rail 46 Units / Rail
*NC = No Connection Pin assignment is for Dual-in-Line Package. For PLCC pin assignment, see the Pin Conversion Tables on page 18 of the ON Semiconductor MECL Data Book (DL122/D).
(c) Semiconductor Components Industries, LLC, 2002
1
January, 2002 - Rev. 7
Publication Order Number: MC10107/D
MC10107
ELECTRICAL CHARACTERISTICS
Test Limits Pin Under Test 8 4, 9, 14 5, 7, 15 * 2 2 3 3 2 2 3 3 2 2 3 3 2 2 3 3 0.5 -1.060 -1.060 -1.060 -1.060 -1.890 -1.890 -1.890 -1.890 -1.080 -1.080 -1.080 -1.080 -1.655 -1.655 -1.655 -1.655 Min t++ t+ - t-+ t- - t++ t+ - t-+ t- - Rise Time Fall Time (20 to 80%) (20 to 80%) t+ t- Inputs 4,9 or 14 to either Output Inputs 5,7 or 15 to either Output ** ** -1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.5 3.5 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 Typ 2.0 2.0 2.0 2.0 2.8 2.8 2.8 2.8 2.5 2.5 -0.890 -0.890 -0.890 -0.890 -1.675 -1.675 -1.675 -1.675 -30C Min Max 31 425 350 0.5 -0.960 -0.960 -0.960 -0.960 -1.850 -1.850 -1.850 -1.850 -0.980 -0.980 -0.980 -0.980 -1.630 -1.630 -1.630 -1.630 Max 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.7 3.5 3.5 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 1.1 4.0 4.0 4.0 4.0 4.0 4.0 4.0 4.0 3.8 3.8 -0.810 -0.810 -0.810 -0.810 -1.650 -1.650 -1.650 -1.650 Min +25C Typ Max 28 265 220 0.3 -0.890 -0.890 -0.890 -0.890 -1.825 -1.825 -1.825 -1.825 -0.910 -0.910 -0.910 -0.910 -1.595 -1.595 -1.595 -1.595 -0.700 -0.700 -0.700 -0.700 -1.615 -1.615 -1.615 -1.615 Min +85C Max 31 265 220 Unit mAdc Adc Adc Vdc
Characteristic Power Supply Drain Current Input Current
Symbol IE IinH IinL
Output Voltage
Logic 1
VOH
Output Voltage
Logic 0
VOL
Vdc
Threshold Voltage
Logic 1
VOHA
Vdc
Threshold Voltage
Logic 0
VOLA
Vdc
Switching Times (50 Load) Propagation Delay
ns
* Individually test each input applying VIH or VIL to input under test. ** Any Output.
http://onsemi.com
2
MC10107
ELECTRICAL CHARACTERISTICS (continued)
TEST VOLTAGE VALUES (Volts) @ Test Temperature -30C +25C +85C Pin Under Test 8 4, 9, 14 5, 7, 15 * 2 2 3 3 2 2 3 3 2 2 3 3 2 2 3 3 4, 5 4 5 4 5 4, 5 5 4 4 4 5 4 5 4 4 +1.1V t++ t+ - t-+ t- - t++ t+ - t-+ t- - Rise Time Fall Time (20 to 80%) (20 to 80%) t+ t- Inputs 4,9 or 14 to either Output Inputs 5,7 or 15 to either Output ** ** 5, 7, 15 5, 7, 15 5, 7, 15 5, 7, 15 4, 9, 14 4, 9, 14 4, 9, 14 4, 9, 14 4, 9, 14 4, 9, 14 Pulse In Input 4, 9 or 14 Input 5, 7 or 15 Any Input Any Input Pulse Out
Corresponding XOR/XNOR Outputs
VIHmax -0.890 -0.810 -0.700
VILmin -1.890 -1.850 -1.825
VIHAmin -1.205 -1.105 -1.035
VILAmax -1.500 -1.475 -1.440
VEE -5.2 -5.2 -5.2 (VCC) Gnd 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16 +2.0 V 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16 1, 16
TEST VOLTAGE APPLIED TO PINS LISTED BELOW VIHmax 5, 7, 15 * * * VILmin VIHAmin VILAmax VEE 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 -3.2 V 8 8 8 8 8 8 8 8 8 8
Characteristic Power Supply Drain Current Input Current
Symbol IE IinH IinL
Output Voltage
Logic 1
VOH
Output Voltage
Logic 0
VOL
Threshold Voltage
Logic 1
VOHA
Threshold Voltage
Logic 0
VOLA
5
Switching Times Propagation Delay
(50 Load)
Corresponding XOR/XNOR Outputs Corresponding XOR/XNOR Outputs
* Individually test each input applying V IH or VIL to input under test. ** Any Output. Each MECL 10,000 series circuit has been designed to meet the dc specifications shown in the test table, after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse air flow greater than 500 linear fpm is maintained. Outputs are terminated through a 50-ohm resistor to -2.0 volts. Test procedures are shown for only one gate. The other gates are tested in the same manner.
http://onsemi.com
3
MC10107
PACKAGE DIMENSIONS
PLCC-20 FN SUFFIX PLASTIC PLCC PACKAGE CASE 775-02 ISSUE C
B -N- Y BRK D -L- -M- W D X V A Z R 0.007 (0.180) 0.007 (0.180)
M
0.007 (0.180) U
M
T L-M
M
S
N
S S
0.007 (0.180)
T L-M
N
S
Z
20
1
G1
0.010 (0.250)
S
T L-M
S
N
S
VIEW D-D T L-M T L-M
S
N N
S
H
0.007 (0.180)
M
T L-M
S
N
S
M
S
S
K1 K
C
E 0.004 (0.100) G G1 0.010 (0.250) S T L-M J -T-
SEATING PLANE
F VIEW S
NOTES: 1. DATUMS -L-, -M-, AND -N- DETERMINED WHERE TOP OF LEAD SHOULDER EXITS PLASTIC BODY AT MOLD PARTING LINE. 2. DIMENSION G1, TRUE POSITION TO BE MEASURED AT DATUM -T-, SEATING PLANE. 3. DIMENSIONS R AND U DO NOT INCLUDE MOLD FLASH. ALLOWABLE MOLD FLASH IS 0.010 (0.250) PER SIDE. 4. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 5. CONTROLLING DIMENSION: INCH. 6. THE PACKAGE TOP MAY BE SMALLER THAN THE PACKAGE BOTTOM BY UP TO 0.012 (0.300). DIMENSIONS R AND U ARE DETERMINED AT THE OUTERMOST EXTREMES OF THE PLASTIC BODY EXCLUSIVE OF MOLD FLASH, TIE BAR BURRS, GATE BURRS AND INTERLEAD FLASH, BUT INCLUDING ANY MISMATCH BETWEEN THE TOP AND BOTTOM OF THE PLASTIC BODY. 7. DIMENSION H DOES NOT INCLUDE DAMBAR PROTRUSION OR INTRUSION. THE DAMBAR PROTRUSION(S) SHALL NOT CAUSE THE H DIMENSION TO BE GREATER THAN 0.037 (0.940). THE DAMBAR INTRUSION(S) SHALL NOT CAUSE THE H DIMENSION TO BE SMALLER THAN 0.025 (0.635).
0.007 (0.180)
M
T L-M
S
N
S
VIEW S
S
N
S
DIM A B C E F G H J K R U V W X Y Z G1 K1
INCHES MIN MAX 0.385 0.395 0.385 0.395 0.165 0.180 0.090 0.110 0.013 0.019 0.050 BSC 0.026 0.032 0.020 --0.025 --0.350 0.356 0.350 0.356 0.042 0.048 0.042 0.048 0.042 0.056 --0.020 2_ 10 _ 0.310 0.330 0.040 ---
MILLIMETERS MIN MAX 9.78 10.03 9.78 10.03 4.20 4.57 2.29 2.79 0.33 0.48 1.27 BSC 0.66 0.81 0.51 --0.64 --8.89 9.04 8.89 9.04 1.07 1.21 1.07 1.21 1.07 1.42 --0.50 2_ 10 _ 7.88 8.38 1.02 ---
http://onsemi.com
4
MC10107
PACKAGE DIMENSIONS
CDIP-16 L SUFFIX CERAMIC DIP PACKAGE CASE 620-10 ISSUE T
-A-
16 9
-B-
1 8
C
L
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. 4. DIMENSION F MAY NARROW TO 0.76 (0.030) WHERE THE LEAD ENTERS THE CERAMIC BODY. DIM A B C D E F G H K L M N INCHES MIN MAX 0.750 0.785 0.240 0.295 --0.200 0.015 0.020 0.050 BSC 0.055 0.065 0.100 BSC 0.008 0.015 0.125 0.170 0.300 BSC 0_ 15 _ 0.020 0.040 MILLIMETERS MIN MAX 19.05 19.93 6.10 7.49 --5.08 0.39 0.50 1.27 BSC 1.40 1.65 2.54 BSC 0.21 0.38 3.18 4.31 7.62 BSC 0_ 15 _ 0.51 1.01
-T-
SEATING PLANE
N E F D G
16 PL
K M J
16 PL
0.25 (0.010)
M
M
TB
S
0.25 (0.010)
TA
S
-A-
16 9
PDIP-16 P SUFFIX PLASTIC DIP PACKAGE CASE 648-08 ISSUE R
B
1
8
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEADS WHEN FORMED PARALLEL. 4. DIMENSION B DOES NOT INCLUDE MOLD FLASH. 5. ROUNDED CORNERS OPTIONAL. DIM A B C D F G H J K L M S INCHES MIN MAX 0.740 0.770 0.250 0.270 0.145 0.175 0.015 0.021 0.040 0.70 0.100 BSC 0.050 BSC 0.008 0.015 0.110 0.130 0.295 0.305 0_ 10 _ 0.020 0.040 MILLIMETERS MIN MAX 18.80 19.55 6.35 6.85 3.69 4.44 0.39 0.53 1.02 1.77 2.54 BSC 1.27 BSC 0.21 0.38 2.80 3.30 7.50 7.74 0_ 10 _ 0.51 1.01
F S
C
L
-T- H G D
16 PL
SEATING PLANE
K
J TA
M
M
0.25 (0.010)
M
http://onsemi.com
5
MC10107
Notes
http://onsemi.com
6
MC10107
Notes
http://onsemi.com
7
MC10107
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-0031 Phone: 81-3-5740-2700 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative.
http://onsemi.com
8
MC10107/D

▲Up To Search▲

Price & Availability of MC1010702

	To Download MC1010702 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .